|
|
|
|
|
|
|
EINSTEIN
COMBO
The youngest
addition to the DIEZEL-Family, the EINSTEIN-COMBO, has 2
channels: Channel 1 has 3 different modes:
Clean
(Clean :-)
Texas (AC30 / JCM 800 Style, not to much gain:"classic"
Rock!
Mega (Rock to Heavy Rhythm - lots of balls!)
Channel 2 is named "Lead", and that's what it
does: Lots of Gain and tons of SOUND, a typical DIEZEL.
All in all, the soundsof EINSTEIN are somewhat more vintage-oriented
than his big brothers.
Additionally, a model with built-in reverb (Acoutronics)
is available. The combo is loaded with a Celestion 12"
speaker.
Each
channel has it's own 3-band EQ, gain and volume control.
And as always 2 separate, switchable master gain controls
for individual rhythm/lead volume settings.
Obviously, there are also a presence- and a deep-knob.
On
the rear are the serial and the parallel FX-jacks as well
as the jacks for the footswitches.
The
power amp can be equipped with2 EL34, 6550, 6L6 or KT88
tubes and has a power output of 50 Watts.
The
footswitches control channel 1/2, master-volumes and toggle
reverb on/off (only with the reverb-modell, though :-)
Manual
(PDF)
Pre
Amp: Feat. 2 completely independent hannels,channel 1 in
3 Modes
EQ gain, treble, mid, bass, volume per channel
Tubes 12AX7
Power Amp: Power 50 Watt s
Tubes 2 x EL34, 6550, 6L6 or KT88
Master Section 2 x volume / presence, deep, Reverb (only
reverb-model)
Speaker - Out 4,8,16 Ohm
FX – Loops: 1 paralell, 1 seriell
Finish: black, front silver, blue LEDs
|
EINSTEIN
100 WATT HEAD
The youngest
addition to the DIEZEL-Family, the EINSTEIN-COMBO, has 2
channels: Channel 1 has 3 different modes:
Clean
(Clean :-)
Texas (AC30 / JCM 800 Style, not to much gain:"classic"
Rock!
Mega (Rock to Heavy Rhythm - lots of balls!)
Channel 2 is named "Lead", and that's what it
does: Lots of Gain and tons of SOUND, a typical DIEZEL.
All in all, the soundsof EINSTEIN are somewhat more vintage-oriented
than his big brothers.
Additionally, a model with built-in reverb (Acoutronics)
is available. The combo is loaded with a Celestion 12"
speaker.
Each
channel has it's own 3-band EQ, gain and volume control.
And as always 2 separate, switchable master gain controls
for individual rhythm/lead volume settings.
Obviously, there are also a presence- and a deep-knob.
On
the rear are the serial and the parallel FX-jacks as well
as the jacks for the footswitches.
The
power amp can be equipped with2 EL34, 6550, 6L6 or KT88
tubes and has a power output of 50 Watts.
The
footswitches control channel 1/2, master-volumes and toggle
reverb on/off (only with the reverb-modell, though :-)
Manual
(PDF)
Pre
Amp: Feat. 2 completely independent hannels,channel 1 in
3 Modes
EQ gain, treble, mid, bass, volume per channel
Tubes 12AX7
Power Amp: Power 50 Watt s
Tubes 2 x EL34, 6550, 6L6 or KT88
Master Section 2 x volume / presence, deep, Reverb (only
reverb-model)
Speaker - Out 4,8,16 Ohm
FX – Loops: 1 paralell, 1 seriell
Finish: black, front silver, blue LEDs
|
|
|
|
|
|
|
|
The
HERBERT has 3 different, perfectly independent preamps, which
permit it to tweak the sound for all possible music styles.
The HERBERT delivers easily from clean to crunsh to ultra
gain sounds without much impact to the volume of the amp.
The basic concept is to get all possible sounds at minimum
tweaking trouble, without compromises.
The EQs in general have a very high effective range, therefore
little tweaking results in very effective sound changes. As
starting point we recommend to place the tone controls on
12.00, in order to get your sound with a few quick changes
of the knobs...
The
power amp covers everyone's desires; 180 Watts from six power
tubes, 6L6, EL34, 5881, 6550 or others; they can even be combined!
The interaction from input - and output stage guarantees an
absolutely clean and enormously dynamic sound spectrum.
Not to forget all technical features from Midi to switchable
FX-loops, switchable second master volume, mid cut for all
three channels and so on!
Test it, it's awesome!
...
by the way, this amp looks terrific on stage...
Manual
(PDF)
Pre
Amp: Feat. 3 completely independent channels
EQ gain, treble, mid, bass, volume per channel
add. gain switch on Channel 2
switchable mid. cut with adjustable volume
Tubes 12AX7
Power Amp: Power 180 Watt
Tubes 6 x 6L6 or alternate type
Master Section 2 x volume / presence, deep, FX – return
MX
Speaker - Out 4,8,16 Ohm
FX – Loops: 1 paralell, 1 insert loops, 1 switchable
insert loop
midi in & thru / phantom - power
|
The
VH4 has 4 different preamps which can be adjusted absolutely
independently. The sound options and basic characteristics
are very various and cover all ranges from superclean to ultragain.
Channel 1 and 2 are particularly suitable for gritty funk
and/or dynamic clean sounds. With the gain structure of these
two channels back-to-the-roots blues and vintage sounds can
also be produced. Channel 3 and 4 make a further multiplicity
of sound options possible, from heavy metal rhythms to high
gain leads. Additionally each channel has a switchable insert
loop.
The sound controls are very efficient. The lows and trebles
are very balanced and leave enough space for warm and cutting
mids. The interaction of pre and output stage guarantees an
absolutely clean and dynamic sound impression...
.Manual
(PDF)
Pre Amp: Feat. 4 completely independent channels
EQ gain, treble, mid, bass, volume per channel
add. bright switch on channel 2
insert FX – Loop per channel
Tubes 12AX7
Power Amp: Power 100 Watt
Tubes 4 x 6L6 or alternate type
Master Section 1 x volume / presence, deep, FX – return
MX
Speaker - Out 4,8,16 Ohm
FX – Loops: 2 sends – 4 insert loops / parallel
& serial returns
2 switchable FX Loops / Mix - mode
midi in & thru / phantom - power
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
