|
|
|
| Thumbnail |
AVT Series |
Price |
 |
The AVT100 is
a 100W, three-channel 1x12" combo with digital effects. Three
tube pre-amp channels are voiced to give the broadest tonal
range possible, from clear, crystal clean to valve-induced crunch
and on to the most extreme gain ever found in a Marshall. This
third channel also features a scoop switch that you flip to
get bone-crushing crunch. Sixteen custom-voiced digital effects
are selected and adjusted by three simple knobs: Mix, Adjust,
and Select. |
$call for price |
 |
It is amazingly
loud for its small size. Ideal for for use in the home studio
and dressing room, for backstage warmups and low-level rehearsals.
The tube-based quality of its clean and overdrive modes will
redefine your expectations of a low-powered, compact combo.
It also features a CD input, speaker-emulated DI output, and
a headphone jack that mutes the speaker. Like all the AVTs,
its pre-amp section is based on a 12AX7 and delivers great tone.
10" speaker. 20W. |
$call for price |
 |
Four channels;
150 watts of power; and two separate, sixteen digital effects
sections! The tube preamp drives the Clean, Overdrive 1 and
Overdrive 2 channels with an added acoustic simulator channel
(makes any electric sound like an acoustic). Because all four
channels are footswitchable (switch included), this amp gives
guitarists ample versatility on stage. Two digital effects sections
enhance this flexibility. One section is dedicated to the clean
and simulator channels, the other to the overdrive channels.
All effects are tweakable via mix, adjust, and select knobs;
and are on/off footswitchable. With 150W driving a Celestion
12" (custom-designed for the AVT series), this amp cranks without
losing focus. Headphone jack, speaker emulated line out, and
an effects loop with level and front panel mix control. Like
all the AVTs, its pre-amp section is based on a 12AX7 and delivers
great tone. Includes FS-06D footswitch. |
$call for price |
 |
It boasts the
same four channels and two effects sections as the 150. Delivers
75W per side to two 12" speakers, taking full advantage of the
two effects sections to create a greater richness and depth
of sound. The left and right speaker outputs can also be used
to drive extension cabs. Using the headphone out with master
volume down allows silent practice, and using the speaker emulated
line outs with the master volume down allows silent recording.
The effects loop also offers stereo returns. Like all the AVTs,
its pre-amp section is based on a 12AX7 and delivers great tone. |
$call for price |
 |
The AVT50's
two footswitchable tube pre-amp channels deliver glistening
clean tones and a roaring crunch that just oozes vintage authenticity.
Crank the overdrive gain to the max and you have a high gain
sound that packs an unbelievable punch, yet stays tight and
focused thanks to the well-designed closed-back cab. Includes
a series effects loop, CD input, headphone jack, speaker-emulated
DI, and an Accutronics reverb. Like all the AVTs, its pre-amp
section is based on a 12AX7 and delivers great tone. 12" speaker.
50W power |
$call for price |
| Thumbnail |
DSL Series |
Price |
 |
A hot little
combo that's all Marshall. It's an all tube design, employing
EL84s and delivering 40W of power to a single custom-voiced
Celestion 12" speaker. Features footswitchable gain boost on
its lead channel, with two totally independent channels: Clean
and Overdrive. Includes reverb, speaker emulation output, a
parallel FX loop, and a supplied LED-equipped footswitch. |
$call for price |
| Thumbnail |
MG Series |
Price |
 |
Though compact
in size, each one delivers a dynamic yet toneful punch, and
they're all suitable for a wide variety of purposes including
rehearsal, recording and even live work. The MG250DFX is a 2-channel
stereo amp with special features such as FDD (Frequency Dependent
Dampening), CD ins, plus emulated line out, and emulated headphone
jacks. It features digital effects including reverb, delay,
chorus, and flange. With 100W (2 x 50W) and 2 - 12" Celestion
speakers, this is a fully gig-capable amp, and it retains all
the features that make it great for practice, too. |
$call for price |
 |
Compact combo
boasts 2 channels, a custom-voiced 6-1/2" speaker, and 10W of
Marshallized power. Its clean channel will give you shimmering
pristine tones, and when cranked it produces a musical crunch
perfect for the blues. The overdrive channel kicks in a bunch
of the distortion that has made the Marshall name. Emulated
headphone output gives you great tone and mutes the speaker.
Includes CD input. A great amp for the studio, too. |
$call for price |
 |
The MG100DFX
is a 2-channel amp with special features such as FDD (Frequency
Dependent Dampening), CD ins, plus emulated line out, and emulated
headphone jacks. It features digital effects including reverb,
delay, chorus, and flange. With 100W and a 12" Celestion speaker,
this is a fully gig-capable amp, and it retains all the features
that make it great for practice, too. |
$call for price |
 |
Get the Marshall
sound in a compact practice/gigging amp. Though small, it delivers
a dynamic yet toneful punch. 50W. 12" speaker. 2 footswitchable
channels. Loaded with digital effects including reverb, delay,
chorus, and flange. Includes special features such as FDD (Frequency
Dependent Dampening), CD ins, plus emulated line out, and emulated
headphone jacks. |
$call for price |
 |
Get the Marshall
sound in a compact practice/backstage amp. Though small, it
delivers a dynamic yet toneful punch. 30W. 10" speaker. 2 channels.
Loaded with digital effects including reverb, delay, chorus,
and flange. Includes special features such as FDD (Frequency
Dependent Dampening), CD ins, plus emulated line out, and emulated
headphone jacks. |
$call for price |
 |
Get the Marshall
sound in a compact practice amp. Though small, it delivers a
dynamic yet toneful punch. 15W. 8" speaker. 2 channels. Loaded
with digital effects including reverb, delay, chorus, and flange.
Includes special features such as FDD (Frequency Dependent Dampening),
CD ins, plus emulated line out, and emulated headphone jacks. |
$call for price |
 |
Compact combo
with 2 channels, a custom-voiced 8" speaker and 15W of screaming
Marshall tone. The clean and overdrive channels share a 3-band
EQ with bass, contour, and treble controls for plenty of tweakability.
|
$call for price |
| Thumbnail |
TSL Series |
Price |
 |
This remarkable
amp uses two different 12" speakers, a Marshall Celestion Vintage
and a Heritage for enhanced sonic capabilities. Incorporates
four ECC83 pre-amp and four EL34 power tubes. You get three-channel
tonal flexibility with Tone Shift switches on the Crunch and
Lead channels, and a Mid Boost switch on the Clean channel.
Its also equipped with two parallel effects loops, dual reverb
controls, two Deep switches, a 5-way LED footswitch, plus a
VPR (Virtual Power Reduction) switch which emulates the sound
and feel of a fully saturated 25-watt amp. Two additional features
are Marshall's acclaimed Speaker Emulation and a Power Amp Mute
button for silent recording. |
$call for price |
 |
Clean, crunch,
and lead channels, footswitchable with independent volume and
gain knobs. Dishes out 60W of pure tube tone to 2 specially
designed 12" speakers. Tube complement includes 4 ECC83s in
the pre-amp and 2 EL34 power tubes. Footswitchable reverb has
clean and crunch/lead controls. Channel controls are also dual:
one set for clean (gain, bass, mid, treble) and the other for
crunch and lead (gain, volume, bass, mid, treble) plus a tone
shift switch to scoop mids. Also includes master volume, presence,
and a deep switch for tight bass boost. |
$call for price |
|
|
